OYI Electronic blog

What’s the Best Bus Blind Spot Solution in 2023?

Table of Contents

Driving a bus is no easy task. The driver should care about themselves and all the passengers simultaneously. A bus also has blind spots like every other vehicle. These areas are invisible to the side-view mirror because of a bus’s build and body.

So, the question is: what is the solution to blind spots? How do you see vehicles in your bus blind spots to be safe? The answer is not limited to one specific bus blind spot solution. In fact, various devices can eliminate or reduce the dangers of blind spots. Let’s look at them individually and discuss the best one in this detailed guide!bus-blind-spot-solution

What Is a Bus Blind Spot Solution?

Generally, a blind spot solution refers to an advanced driving assistance system. Also known as ADAS, these devices either come factory-installed or integrated later. Their primary purpose is to prevent blind spot accidents that would otherwise have devastating results.

Since every vehicle has blind spots, the solutions are also widely available. Similarly, a bus can also be equipped with advanced sensors, cameras, and hybrid systems. This way, the bus driver can monitor their blind spots and make better decisions.

Increasing Need for a Bus Blind Spot Solution

Unfortunately, bus accident reports are increasing every year. According to a study, over 14,000 bus crashes occur yearly. Another report suggests that more than 24,000 people experience injuries in these accidents.

Busses are inevitable; more than 700 million people travel by bus. That includes young students as well as senior citizens. This factor makes bus driving all the more dangerous. Even though bus accidents are less frequent than car accidents, they can be ten times more impactful.

A bus accident can injure its passengers and nearby people. That is why many countries promote using a solution for bus blind spots. They understand this easy-to-use device can save devastating crashes and protect thousands of lives.


What are Bus Blind Spot Solutions?

The blind spots of a bus are extremely dangerous. That is why you need a solution to keep yourself and others protected.

But the question is, which bus blind spot solution should you choose? Let’s take a look:


1. Blind Spot Detection System

Generally, almost all large vehicles use the same universal blind spot detection. Some advanced buses might come equipped with this system. However, most models require an aftermarket installation.

A blind spot detection system is the most effective choice for your bus. That’s because it requires minimal human interference. It relies on sensors that emit millimeter radar waves to detect nearby vehicles in blind spots.

So, how do you overcome blindspots? If a vehicle lurks in your blind spots, you will get a notification via the system’s alert mechanism. Typically, it is either audible, visual, or both.

Here are some of the benefits of this aftermarket bus blind spot detection systems:

  • It is easy to use, making it accessible for beginners and experienced bus drivers alike.
  • Its weather-resistant sensors work in all outdoor conditions like rain, snow, fog, etc.
  • You need to provide minimal care for the system, like cleaning the sensors occasionally.
  • The system provides accurate results by calculating an oncoming vehicle’s speed, displacement, and distance.
  • Generally, it has a straightforward installation method, eliminating the need for third-party professionals and cutting down extra costs.
  • You can find various models for this system, like 24 11R and 79 01R.

2. Blind Spot Camera System

A blind spot camera works pretty much the same as the detection system. However, it relies on cameras rather than sensors. These lenses provide real-time footage of the blind spots to the driver. Usually, the cameras are mounted on a bus’s left and right sides. But you can also find single-camera systems that are comparatively cheaper and easier to install.

Instead of an alert system, you get a display screen. This monitor comes in a 720p or 1080p resolution. It sits on the dashboard or requires additional installation, providing an easy view to the driver. Since the driver can watch the live video of their surroundings, it is an efficient tool for preventing major collisions.

Let’s look at its highlighting features:

  • The real-time footage might suit experienced drivers, who can easily drive and track the live video simultaneously.
  • Its installation is pretty simple, even with the addition of components like a display screen.
  • The cameras have a sturdy mounting support, providing stable footage even in windy weather conditions.
  • You can adjust the cameras to get the optimal view of your bus blind spots.
  • Usually, you get more than one video mode to suit your preferences.

3. Electronic Rear View Mirror

The electronic rear view mirror also consists of a camera. However, it is a more advanced version of the traditional blind spot cameras. These systems may come with up to 4 cameras.

Where’s the display screen? This system has another twist, as the screen mounts over the bus’s existing rear-view mirror. The single screen provides the display from up to four sources simultaneously. This system offers modes like split screens, switch cameras, etc.

This system relies on batteries for its cameras. Modern electronic rear view mirrors are wireless, providing easy installation.

Here are some of the major benefits of electronic rear view mirrors:

  • It offers a more user-friendly approach than the traditional blind spot camera system because more bus drivers are familiar with tracking the rear view mirror.
  • You can get this system in up to four cameras, getting live footage from all your blind spots.
  • Generally, the rear-view mirror is more accessible for the bus driver due to its construction than an additional display screen.
  • You don’t need experience to handle this system, as it works effectively for new, intermediate, and advanced drivers.

What’s the Best Bus Blind Spot Solution?

The following are the most popular three bus blind spot solutions:

  • Blind spot detection system
  • Blind spot camera system
  • Electronic rear view mirror


Each solution brings something unique to the table. First, you should always consider your requirements and budget. Based on these constraints, you can pick the best solution for you.

Here are some factors that may affect your decision.

1. Experience

Remember that not every bus blind spot solution may suit beginners. For instance, the traditional blind spot camera system might not be the best option for new drivers. That’s because it requires your attention on the road and cameras to track your blind spots. Thus, a new driver can get overwhelmed in such situations.

2. Installation Method

The installation method can be the make-or-break deal when choosing a bus blind spot solution. If a system has a complex setup, you will need a professional. So, you can calculate another expense.

Alternatively, easy-to-install systems like blind spot detection are better for non-tech-savvy drivers. They can read the product manual and easily understand how the setup works.

3. Maintenance

As a professional bus driver, you might not get much time to maintain the parts of bus body. Hence, choosing a system with minimal care is a better option. Electronic rear view mirror and blind spot camera systems rely on camera lenses. And they can get dirty, especially in extreme weather conditions. Moreover, a battery change is another frequent requirement, combined with camera calibration and adjustments.

That might not be the case with a blind spot detection system. Its sensors work effectively with minimal care due to their weather-resistant build.

4. Accessibility

One of the most overlooked factors when buying any advanced driving assistance system is market accessibility. Even though the ADAS market is growing rapidly, many countries are still far behind. So, you will not find advanced systems like a wireless electronic rear view mirror in that market.

It is best to research your local market. You can find which systems are available and at what price. Then, you can compare those prices with reputable international manufacturers, like OYI Electronic.

5. Budget

Lastly, budget can be the single most important factor when choosing a bus blind spot solution. Let’s say you want a modern system like the electronic rear view mirror but can’t afford it. Undoubtedly, many advanced driving assistance systems are expensive, especially the newer ones.

That’s because countries have only just become acceptable to this industry. The US is a prime example of allowing foreign companies to manufacture and assemble advanced driving assistance systems.

Another reason is the intermediary costs involved with most companies. That happens when the seller isn’t the same as the manufacturer. Hence, they keep their middlemen costs in the overall system price. At the same time, you have manufacturers like OYI Electronic who sell high-quality and durable advanced driving assistance systems at factory prices.


Remember that choosing a bus blind spot solution depends entirely on your needs. While all three systems have different frameworks, their basic premise is the same. They keep the driver, passengers, and others on the road safe from impactful crashes.

We would highly recommend choosing a reliable manufacturer like OYI Electronic. You can get a free price quote and customized packaging for your business needs. Whether you need a car, truck, motorcycle, or bus blind spot solution, OYI Electronic can fulfill your needs!

OYI company's factory area

Related Posts

Scroll to Top